'usb upgrade interface'

FEATURES Compatible with DVB-C standards Fast and reliable signal data processing Real-Time SNR monitor Specific details of measurement statistics for channel quality Constellation for DVB-C signals Audible tone to reflect signal strength High-resolution LCD display Capacitive touch panel Friendly and intuitive graphical user interface High-capacity lithium battery for long operation and storage hours USB interface for firmware upgrade and file transfer

Syrotech SY-GPON-8OLT complies with ITU-T G.984/G.988 and meets requirements about GPON OLT in Network Access Technical Requirements. It fully supports CTC2.0, automatic discovery and cooperation with ONUs of different manufacturers. Syrotech SY-GPON-8OLT supports the Asymmetric uplink 1.25Gbps/downlink 2.5Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users. Its coupling ratio ups to 1:128, and its support of different hybrid ONU networks minimize the carrier's investment. Syrotech SY-GPON-8OLT, based on the edge-cutting technologies, is strong in functions. A few of its functions such as QoS guarantee, SLA and DBA can be easily listed out. Specificaons: Network Security Limiting the maximum number of users on each port Port isolation Packet storm control Flow-based ACL access control function Transmission data encryption on the PON interface Supports TACAS+ Configuration Management Various management modes such as CLI, SNMP and TELNET Conducting software upgrade through TFTP Debug output Physical Characteristics Dimensions mm (W×D×H): 442.5x304x 44 Installation: standard 19-inch rack-mounted Weight: 5.25Kg Environment Operating environment: 0°C-45°C; 10%-85% non-condensing Storage environment: -40°C-80°C; 5%-95% non-condensing Power Supply Input voltage: AC90 ~ 240V, DC 36 ~ 72V dual-power input, DC/AC power supply and hot-swap

Syrotech SY-GPON-8OLT complies with ITU-T G.984/G.988 and meets requirements about GPON OLT in Network Access Technical Requirements. It fully supports CTC2.0, automatic discovery and cooperation with ONUs of different manufacturers. Syrotech SY-GPON-8OLT supports the Asymmetric uplink 1.25Gbps/downlink 2.5Gbps PON transmission rate, efficient bandwidth usage and Ethernet services, helping carriers to provide reliable services to their users. Its coupling ratio ups to 1:128, and its support of different hybrid ONU networks minimize the carrier's investment. Syrotech SY-GPON-8OLT, based on the edge-cutting technologies, is strong in functions. A few of its functions such as QoS guarantee, SLA and DBA can be easily listed out. Specificaons: Network Security Limiting the maximum number of users on each port Port isolation Packet storm control Flow-based ACL access control function Transmission data encryption on the PON interface Supports TACAS+ Configuration Management Various management modes such as CLI, SNMP and TELNET Conducting software upgrade through TFTP Debug output Physical Characteristics Dimensions mm (W×D×H): 442.5x304x 44 Installation: standard 19-inch rack-mounted Weight: 5.25Kg Environment Operating environment: 0°C-45°C; 10%-85% non-condensing Storage environment: -40°C-80°C; 5%-95% non-condensing Power Supply Input voltage: AC90 ~ 240V, DC 36 ~ 72V dual-power input, DC/AC power supply and hot-swap

GPON OLT 16 PON Product introduction GPON OLT 16 PON, 4*1GE(SFP)/10GE(SFP+) Uplink. Automatic configuration,Automatic upgrade, EMS & Web management Material: Steel shell Size: 442mm*200mm*43.6mm（L*W*H） Weight: 3.1kg Functional characteristics GPON OLT 16 PON ►Satisfactory standard Meet ITU-T G984/G.988 standard Meet China’s relevant GPON standards ►L3 OLT Support static route RIP v1/v2、OSFP v2 ►Easy to manage Friendly EMS/Web/Telnet/CLI management CLI command style similar to mainstream manufacturers Support APP management ►Fully open platform Open to any brand of ONT ►High performance cost 1U height compact design Adopt mainstream chip scheme Technical parameters Item V1600G2 Chassis Rack 1U 19 inch standard box 1G/10G Uplink Port QTY 12 Copper 10/100/1000M auto-negotiation 8 SFP 1GE 4 SFP+ 10GE GPON Port QTY 16 Physical Interface SFP Slot Connector Type Class B+/C+ Max splitting ratio 1:128 Management Ports 1*10/100BASE-T out-band port, 1*CONSOLE port PON Port Specification(Class B+ module) Transmission Distance 20KM GPON port speed Upstream 1.244G Downstream 2.488G Wavelength TX 1490nm, RX 1310nm Connector SC/UPC Fiber Type 9/125μm SMF TX Power +1~+5dBm Rx Sensitivity -28dBm Saturation Optical Power -8dBm Dimension(L*W*H) 442*320*43.6mm Weight 4.5kg AC Power Supply AC:90～264V, 47/63Hz DC Power Supply x Double Power Module Hot Backup √ Power Consumption 85W Operating Environment Working Temperature 0～+50℃ Storage Temperature -40～+85℃ Relative Humidity 5~90%(non-conditioning)

The V1600G0-B is a GPON OLT with 4 PON ports that meets flexible and fast FTTx access, suiting the scenarios such as sparse/ remote/cost-sensitive area, smart industrial park, commercial building and FTTM, etc. Highlights Compact design, meets various application scenarios. Netlink 4 port OLT Supports the deployment in diverse scenarios including low density areas, remote areas, sparsely-populated areas and industry parks. Supports FTTM and sharing site/rack with wireless base stations. Small size and lightweight, easier to delivery and install Netlink 4 port OLT Small size and lightweight, easy to transport and install, Supports multiple installation modes, like limited room space basement, low-voltage room and small rack or cabinet. Carrier-class security protection, support dynamic routing protocol RIP&OSPF, ensure the safe operation of network Supports uplink redundancy protection including LACP STP RSTP and MTP. and support RIPEOSPF protocol. Supports Ink protection. Lower TCO Netlink 4 port OLT dramatically saves on investment fees in trunk fires, pipe. Engineering, and facilities. Effectively reduce CapEx and OpEX. Item V1600G0-B V1600G1-B V1600G2-B Dimension (L*W*H) 442mm*220mm*43.6mm 442mm*320mm*43.6mm GE/10GE Uplink Port QTY 4 8 8 RJ45(GE) 2 4 4 SFP(GE) / 2 / SFP+(10GE) 2 2 4 GPON Port QTY 4 8 16 Physical Interface SFP Slots, Max splitting ratio ≤ 1:128 Management Ports 1*FE out-band port, 1*CONSOLE port, 1*USB2.0, 1*Type-C USB(For console, G2-B) PON Port Specification (Class C+++ Module) Transmission Distance 20KM GPON port speed Upstream 1.244Gbps, Downstream 2.488Gbps Wavelength TX 1490nm, RX 1310nm Connector SC / UPC Fiber Type 9/125μm SMF Supported PON module level Class B+, C, C+, C++, C+++ Weight (Single AC Power) Net Weight 2.95kg 4.05kg 4.80kg Gross Weight 4.15kg 5.65kg 6.40kg Power Supply AC:100～240V, 47/63Hz or/and DC:-48V, Double Power Module Hot Backup Power Consumption 35W 45W 85W Operating Environment Working Temperature 0°C ~ +50°C Storage Temperature -40 ~ +85°C Relative Humidity 5 ~ 90% (non-conditioning) Management Mode EMS, WEB, SNMP, Telnet , CLI

Deul Mode (can access GPON/EPON OLTs). ► Plug and play with integrated auto-detection, auto-configuration, and automatic firmware upgrades. ► Fully compliant with the IEEE 802.3ah specification and OAM functions. ► Supports 802.11n 2T2R speeds of up to 300 Mbps. ► Offers rich VLAN support, DHCP server capabilities, and IGMP snooping for multicast features. ► Provides advantageous traffic management. ► Features advanced Dynamic Bandwidth Allocation (DBA). ► The WAN port can operate in either bridge or router mode. ► Includes advanced Layer 2 features such as QinQ VLAN and QoS support. ► Supports NAT and firewall functions. ► Offers Console/Telnet/NMS management interfaces for easy operation and maintenance. ► Supports a 2K MAC address table. ► Fully compatible with OLTs based on Broadcom, PMC, and Cortina chipsets.

V2804AC-Z (4GE+WiFi5+CATV+USB3.0 XPON ONT) is a broadband access device specially designed to meet the needs of fixed network operators for FTTH and triple play services. The ONT is based on high-performance chip solutions, supports XPON dual-mode technology (EPON and GPON), and also supports IEEE802.11b/g/n/ac WIFI technology and other Layer 2/Layer 3 functions, providing data service for carrier-grade FTTH applications. In addition, the ONT also supports the OAM/OMCI protocol, and we can configure or manage various services of the ONT on the VSOL OLT. The ONT has high reliability, is easy to manage and maintain, and has QoS guarantees for various services. It conforms to a series of international technical standards such as IEEE802.3ah and ITU-T G.984. Material: ABS Plastic Size: 205mm×140mm×37mm(L×W×H) Weight: 0.34Kg

A Light Interface Unit (LIU), also known as a fiber patch panel, is a crucial component in fiber-optic communication networks. It serves as the interface between optical fibers and active equipment, facilitating organized and efficient management of fiber connections. Key features typically include: Fiber Termination and Management: LIUs provide secure termination points for optical fibers, reducing signal loss and ensuring stable connections. Port Density: They come in various configurations, offering different port densities to accommodate network requirements. Protection and Durability: Constructed with robust materials, LIUs protect delicate fibers from environmental factors and physical damage. Ease of Maintenance: Designed for easy access, they simplify tasks like reconfiguration, testing, and troubleshooting.

The TYPE-82C’s advanced electronic design, which accommodates the built-in dual heating system and simultaneous operation, makes the faster fusion splicer available on the market by reducing the bottle neck of “heater wait time”. With an individual heater cycle time of only Approx.29 seconds (60mm Fiber protection sleeves) and a splice cycle of only Approx.5 seconds (Quick mode), the TYPE-82C improves splicing efficiency and productivity dramatically, thereby reducing labor time and costs while increasing project and customer service turn-up. Features: High Speed dual independent ovens for productivity Touch optimized user interface and high resolution display Proven Field toughness Long life battery for 300 splice & heat cycles Wide and high resolution touch panel -5″ touch screen colour LCD display Smartphone-like easy operation Compact & Lightweight with only 2.2 kg weight including battery Ultra fast splicing (5 sec.) Ultra fast heating (9 sec.) Dust-free, water resistant and shock-proof. Touch-screen operation Remote support via internet Upgrades software via internet Remote interactive maintenance via internet