'10 50'

2GE+POTS AC WiFi XPON HGU terminal devices are designed for fulfilling FTTH and triple play service demand of fixed network operators. These boxes are based on the mature Chipset (Realtek) technology, which have high rao of performance to price, and the technology of IEEE802.11b/g/n/ac WiFi, Layer 2/3,. They are highly reliable and easy to maintain, with guaranteed QoS for different service. And they are fully compliant with technical regulaons such as IEEE802.3ah ITU-T G.984.x and technical requirement of GPON Equipment 1 G/EPON port(EPON PX20+ and GPON Class B+) Wavelength:Tx1310nm,Rx 1490nm SC/UPC connector PON interface Receiving saturaon :≥-8dBm Receiving sensivity: ≤-28dBm Transming opcal power: 0~+4dBm Transmission distance: 20KM LAN interface 2×10/100/1000Mbps auto adapve Ethernet interfaces. Full/Half, RJ45 connector Wireless Compliant with IEEE802.11b/g/n/ac 2.4GHz Opera ng frequency: 2.400-2.483GHz 5.0GHz Opera ng frequency: 5.150-5.825GHz Support MIMO, 2T2R,5dBi external antenna, rate up to 1.167Gbps Support: mul ple SSID TX power: 11n--22dBm/11ac--24dBm POTS interface 1×FXS, RJ11 connector Support: G.711/G.723/G.726/G.729 codec Support: T.30/T.38/G.711 Fax mode, DTMF Relay Line tesng according to GR-909 LED 12, For Status of PWR,PON ,LOS,WAN,WiFi,FXS,ETH1~4,WPS . Operang condion Temperature: 0℃～+50℃ Humidity: 5%～90%（non-condensing） Storing condion Temperature : -30℃～+75℃ Humidity :5%～90%（non-condensing） Power supply DC 12V,1/1.5A Power consumpon ≤10W Dimension 205mm×140mm×37mm（L×W×H） Net weight 0.34Kg

A 10/100/1000Mbps Media Converter is a networking device that enables the conversion between electrical Ethernet signals and optical signals, facilitating seamless data transmission over fiber optic cables. This technology is essential for extending network reach, especially in environments requiring high-speed and long-distance connectivity. Key Features: Auto-Negotiation: Supports auto-sensing of 10/100/1000Mbps Ethernet speeds, ensuring compatibility with various network devices. Extended Transmission Distance: Utilizes fiber optic technology to extend network transmission distances significantly, with capabilities ranging from 220 meters in multi-mode configurations up to 80 kilometers in single-mode setups. Connector Types: Equipped with standard SC connectors for secure fiber optic connections, with options for FC or LC connectors depending on the specific model and application requirements. Wavelength Support: Operates at standard optical wavelengths, including 850 nm for multi-mode and 1310 nm or 1550 nm for single-mode fiber, optimizing performance based on the fiber type used. Full/Half-Duplex Support: Capable of operating in both full-duplex and half-duplex modes, with auto-sensing capabilities to adjust based on network configurations.

Definition: The EXFO PON Power Meter PPM-350C is a high-precision optical power meter designed specifically for testing Passive Optical Networks (PON). It enables technicians to analyze and measure optical power levels at different wavelengths used in fiber optic networks, such as 1310 nm, 1490 nm, and 1550 nm. It is essential for FTTH (Fiber-to-the-Home) installations, troubleshooting, and maintenance to ensure optimal network performance. Key Features: Triple-Wavelength Measurement – Simultaneously measures 1310 nm (upstream), 1490 nm (downstream), and 1550 nm (video services) in PON networks. Real-Time Pass/Fail Analysis – Provides instant power level analysis to quickly determine if the network meets required standards. User-Friendly Interface – Features an easy-to-read display and intuitive controls for efficient operation. Long Battery Life – Designed for extended field use, ensuring continuous testing without frequent recharging. Highly Accurate & Reliable – Delivers precise measurements with minimal signal loss, making it ideal for professional fiber optic technicians.

Overview : From Deviser Instruments' 4th generation of OTDR, the fieldportable AE3100 marks a giant leap forward in fiber-optic measurement performance and utility. Single-mode models A through F can test the 1310nm and 1550nm wavelengths with dynamic range up to 45dB, while multimode models M through EM add quad-λ functionality at up to 43dB. Featuring intuitive touchscreen controls and real-time data analysis, the AE3100 is the ideal test instrument for constructing, deploying, maintaining, and authenticating FTTx networks - as well as verifying access networks. Multiple models and configuration options ensure your unique measurement needs are covered Key Features: • High performance OTDR for FTTx and RFoG networks • 7”, 800x480 LCD touchscreen places power and convenience at your fingertips • Excellent short-distance performance with 0.8m event dead zone and 4m attenuation dead zone • Dual- and quad-wavelength test options with broad dynamic range coverage (28 - 45dB and 24 - 43dB respectively) • Minimum 5cm resolution • Intelligent event analysis • Excellent stability and repeatability • "FiberPath" fiber link mapping mode • Multiple options for your measurement needs, including: VFL, power meter, light source, and optical fiber microscope • Complete user data ports: supports LAN, USB, SD, & more

The last thing a fiber maintenance technician needs is a double armful of bulky, feature-bloated equipment to bog down the job. The new AE1001 from Deviser Instruments is a sleek, zerofuss OTDR weighing less than 1 kg that tests the common 1310 & 1550nm wavelengths in 5s flat. Low power consumption and a solid 2500mAH battery allow the AE1001 to run automated, manual, or real-time tests continuously for over 4 hours, and are supplemented with the always-handy OPM and VFL. Features:- 1. Ultra-portable, lightweight OTDR for FTTx networks. 2. 4.3” LCD touchscreen is visible in high- or low-light conditions 3.Fast dual-wavelength test generates results in ≤5 seconds 4. Excellent stability and repeatability 5. Save >160k OTDR traces with 16 GB of data storage 6. Dynamic range* : 26/24 dB 7. Wavelength: 1310/1550nm

FEATURES: 1. Ultra-portable, lightweight OTDR for FTTx networks. 2. 4.3” LCD touchscreen is visible in high- or low-light conditions 3.Fast dual-wavelength test generates results in ≤5 seconds 4. Excellent stability and repeatability 5. Save >160k OTDR traces with 16 GB of data storage 6. Dynamic range* : 26/24 dB 7. Wavelength: 1310/1550nm

SOLID SF-750PRO DVB-C (BER+MER) dB Meter with AC / DC Features : Support DVB-C function Support Automatic channel scanning Build highlight LED Show the signal quality of the nixie tube Built-in buzzer Support to check the power cable automatically Support to reset to defaults The unit of signal power support dBm, dBuV Use USB 2.0 for software upgrade and data backup. Specifications of DVB-C signals - Frequency - 47 to 862 MHz Impedance - 75ohm Signal level - -78 to -10dBm Symbol Rate - 1.4M to 7.5M baud Demodulation Scheme - 16QAM / 32QAM / 64QAM / 128QAM / 256QAM Demolution type - DVB-C Bandwidth - 6MHz / 8Mhz

Feature: 5-inch capacitive color touch screen 800 x 480 W VGA Resolution 1310/1550nm ±20nm Wavelength 30/30 dB RMS Dynamic Ranges 2x USB 2.0 ports, 1x mini-USB 2.0 port

The Swift K11 Is An Advanced Core-to-core Alignment Splicer Ideal For Medium And Long Range Optical Circuit, Lan, Catv, Fttx. With A Compact, Light, Rugged Design And A Long Life Battery, The K11 Delivers High Precision Performance. Benefits And Feature. Wide 5.0-inch color LCD monitor with touch screen & bidirectional operation system Powerful lithium polymer battery with large capacity User friendly GUI Optical fiber recognition capability and LED lamp in heater Lowest splice loss ever in the industry Fiber Splicing Machine Specifications Category Description Fiber alignment IPAAS Core-to-Core Alignment (image pattern analysis alignment system) Applicable type of fibers 0.25mm, 0.9mm, 2.0mm, 3.0mm, 4.0mm, indoor cable Fiber count Single fiber Applicable fiber dimensions Cladding diameter: 80~150㎛, Coating diameter: 100㎛~4mm Fiber setting and cleaved length 0.28in ~ 0.63in Splicing modes Splice mode: 300, Heat mode: 100 Typical splice loss SM: 0.02dB, MM: 0.01dB, DS: 0.04dB, NZDS: 0.04dB Return loss > 60dB (typical) Splicing time Typical 6 sec. (quick mode) Sleeve heating time 9 sec (IS-45 Sleeve, IS-45 mode), 13 sec (IS-60 Sleeve, IS-60 mode) Applicable protection sleeve 1.5in, 2.4in, 1.3in or 1.1in for SOC Storage of splice result The last 10,000 results stored in internal memory (with images) Tension test 1.96N ~ 2.25N Operating condition Altitude: 5,000m, Temp: -14℉ to 122℉, Humidity: 0~95%, Wind: 15m/s, Dust/water/shock proof Storage condition Temp: -40℉ to 176℉, Humidity: 0~95% Dimensions 5.6(W) x 6.4(L) x 5.5(H) in (without bumper) Weight With battery: 5.0 lb Viewing method and display Two CMOS cameras and 5.0-inch color touch LCD Fiber view and magnification X/Y: 200X, Max: 400X Power supply DC Lithium polymer battery (14.8V, 4700/6000mAh option), 100~240V AC charger No. of splice cycles with battery Typical 250 cycles / More than 350 (K11-6000) Electrode life More than 3,500 times Terminals USB